ASMedia is the only controller IC manufacturer that can be trusted for these IME. They also have the best Linux support compared to the other options and support pass-through commands. These are commonly found in USB DAS enclosures, and a very small fraction of single disk SATA enclosures

Innostor controllers max out at SATA 2 and lock up when you issue pass-through commands (e.g. to read SMART data). These also return an incorrect serial number. These are commonly found in ultra cheap desktop hard drive docks, and 40pin IDE/44pin IDE/SATA to USB converters

JMicron controllers (not affiliated with the reputable Micron) should be avoided unless you know what you are doing… UASP is flaky, and there are hacky kernel boot time parameters required to get these working on Raspberry Pi boards. Unfortunately these are the most popular ones on the market due to very low cost

Probably not.

However, not all USB to SATA adapters support SMART, so even if there is a bad sector that gets remapped by the HDD on-the-fly (and thus does not show up in the software scan), you may not find out easily

IIRC Beehaw doesn’t federate downvotes. The OP has been pretty heavily downvoted for no valid reason

I’ve tried both on my low powered HTPC and came to the same conclusion - especially noticeable where video acceleration is concerned

Something about that channel feels “off”, don’t know what it is. Maybe all the rants and abundance of negative opinions?? Perhaps it’s the culture difference in how he communicates on camera?

The only positive videos I’ve seen are him moving to macOS, the dell laptop one, and i guess the keyboard one, the other ones seem to be mostly opinion pieces & rants. There are other channels that do a better, more balanced job of this I think

Explains why I was having issues with this in Gnome on my HTPC…

Ended up making a remote button shortcut to maximise and restore apps

I used to have only 4GB in my old Linux HTPC, didn’t take much for it to choke when using the browser. Upgraded to 16GB and no issues since

Some websites I know actually do this - usually end up getting around it by using selectors to identify elements nested in a particular order, rather than using class names. Nowhere near as reliable though

Got to really wonder what’s going on at Mozilla. Between the previous CEO milking it for cash, the purchase of an ad company, and now this?

Absolutely love the ability to share links from my android and have them open automagically on my linux HTPC. Also made a command shortcut for my laptop so I can unlock it from my android. Really versatile

Precisely this

Mine can also dehydrate food super quickly with a variable fan speed, which my traditional oven can’t do without burning through a ton of unnecessary energy

That thread could do with one of these: https://en.m.wikipedia.org/wiki/Fire_retardant

Hehehe

FFmpeg (libavcodec) is just one of 22 codecs that VLC is shipped with

https://wiki.videolan.org/Contrib_Status#Codecs

Micromobility is pretty active if you’re interested in product coverage and news. As for more organic content, it’s pretty infrequent in any of the existing bicycle communities ☹️

After one Google search on my work laptop I was looking for searx instances - a lot of those were going down too due to rate limiting 😭

I used to use MQTT, static_status and Healthchecks.io, and have that data passed through to Home Assistant, but it started to get pretty cumbersome as the amount of machines I had grew.

I now use just Zabbix and HealthchecksIO. I did need to spend some time writing new templates for some additional data I wanted to collect (like SMART data for SSDs that provide health metrics in non-standard attributes, and HealthchecksIO so I could see the status of various checks on my zabbix dashboard)

Zabbix also has some additional features I found appealing, like proxies that can continue recording data when the main server is down, and built in encryption. Some checks like open ports/icmp responses etc can be checked using either the local agent, the remote server, or both, which helps quickly diagnose things like firewall config issues.

I did look at some other solutions, but I wanted something integrated to hit the ground running. Mobile apps are very limited, and there is no official one to my knowledge. I use Moobix which I don’t believe is FOSS - but I could be wrong there

Try each solution out and see what works best for you!

Welcome!

Since you’re on the lemmy.world instance, there’s a bunch of additional interfaces available to you:

• https://old.lemmy.world/ (Something familiar)
• https://a.lemmy.world/
• https://photon.lemmy.world/

If you’re on mobile, there’s a ton of apps to choose from at https://join-lemmy.org/apps , or if PWAs are more your thing, your instance has the Voyager/Mlmym interface setup at https://m.lemmy.world/

Finding communities used to be difficult, but it should be straightforward now just from the search, seeing as it is the largest instance.

Hope you enjoy your stay 😁

I do something similar for my property’s exterior cameras, which are streamed to my VPS in ‘real-time’.

You will need to re-encode the footage - videos are already pretty well compressed, so traditional compression methods like 7z (lzma), gz, zip etc being layered on top can’t compress them further.

For your solution, I’d probably run a find every minute w/ cron to look for these files in a staging/watch folder, move them to another folder so they aren’t picked up on the next run, then re-encode with ffmpeg. Do note that when you re-encode footage, you always lose quality, even if you’re on a high quality preset.

I have a feeling that the Handbrake project can do this with a watch folder though, so might be worth looking into that. After a quick search this looks easier to setup than my solution:

https://github.com/HandBrake/HandBrake
https://github.com/shannah/handbrake-watcher

Typically free of charge for the country’s public services to get a domain if the registrar is based within the country.

There are other countries that don’t actually own their TLDs like .io, .tk, .ga, .cf etc. Mali recently forcibly reposessed their .ml domain from overseas ownership IIRC

I would suggest Plex HTPC on the deck instead, since it works really well with the deck’s gamepad in the normal gaming mode. Touch also works but should probably be considered a last resort IMO