I mean, None of these appeared to specifically be about the air tag. But it is at least does help show a general overall commitment to security. So it’s not as if it’s not a huge point in favor of trusting that the airtag data is safe
Have you verified their encryption method? Where is the source code? Where is the third party public audit that verifies that it’s implemented properly with no other means of access?
Blindly trusting that they say it’s encrypted is basically the same as no encryption
I’ll happily download 63928 depends so long as it continues to work. And it does, unlike python projects that also download 2352 depends but in the process brick every other python program on your system
This, I have been using it for many many years. I wouldn’t call it perfect but it’s better than the other options in my opinion
I can however, store my entire life history of notes and shopping lists inside the sd card
If we didn’t already have the perfect option that is bitwarden I would probably go for this. But there’s really no reason to switch away from bitwarden to this. It’s open source, gets regularly publicly audited, and nothing ever leaves your device unencrypted. So even if they had their data center broken into and all machines stolen physically I wouldn’t have to worry about my passwords
I don’t just mean the voice, even just HOW it gives directions. Google maps gives you multiple warnings for a turn , one way before, one approaching, one right at. It also will often tell you which lane to take a turn in if multiple exist (use the second from the left lane to turn left) if your next turn is right after with little warning.
It’s been a hot minute so i can try again to see if it’s changed but directions were terrible with little extra warning and no taking the next direction into account.
The map was also just… Messy, little outlines for buildings everywhere a bunch of random green squares all over the map that I couldn’t figure out how to turn off and wasn’t even sure what they were meant to represent other than they seemed to roughly correspond with grassy or treed areas but for using it as a navigation app that is extremely annoying because it just makes the whole map of cluttered mess and makes it difficult to really tell what I’m looking at when I’m trying to drive and need to see my next Direction quickly and easily at a glance
I genuinely don’t understand how anyone can believe this, I keep trying it over and over and over and it fails on the absolute most basic of business searches. And some of the directions it gives are just completely nonsensical, and it’s voice guidance is absolutely terrible making it fairly easy to miss a Direction if you’re not able to be looking at the screen
I hate giving my location to Google but at the end of the day they are still the only GPS navigation that doesn’t suck at basic navigation
There’s honestly little to learn, it’s a DC system so it’s a lot more straightforward than some of the nasty that can happen with AC neutral and grounds where and when to bond etc. Positive and negative, use an appropriate sized dc breaker, have a cutoff switch. ¯\_(ツ)_/¯
You can, they require full wiring diagrams for approval and inspection by a master electrician. One of the setups i did was for PSE in Washington. Federal tax credit counts as well in diy
Your screenshot shows 20k spent. I’m assuming you mean after federal tax rebate. As for what numbers
For example with a goal of about 20k spent This bundle gets you 12Kw of inverter output and 30Kwh of batteries for 11k. Then just grab two Of these solar panel pallets for 28Kw of panels. Or Alternatively go smaller with just one pallet and save a bit. Then ofc you will get the 30% federal tax credit on top of everything
So far as i can see from your invoice you won’t have any battery storage, your inverter is less than 4k output. So for the same price you could get 3x the inverter capacity, actually have battery, meaning even during a complete blackout you would still be able to have power, and get 3x as much solar array. Or you could get a similarly sized system for a fraction of the price. EG4 also has a larger inverter than can do the metering if you want that so could trade the 2x pallets for 1x with backfeed inverter
Lots of states are turning hostile towards metered solar, I have no doubt Washington will eventually join them so it might not be long-term a good idea. As for resources https://diysolarforum.com/ has a ton as does https://www.youtube.com/@WillProwse
As for equipment i can’t recommend signature solar enough. I’ve had plenty of problems with the FedEx freight shipping but they’ve always been good about making sure everything is taken care of if there’s any damage without much fuss (always take pictures of even the smallest box damage on delivery)
For example with a goal of about 20k spent This bundle gets you 12Kw of inverter output and 30Kwh of batteries for 11k. Then just grab two Of these solar panel pallets for 28Kw of panels.
Now ofc in summer you will never use that much BUT you should be sizing your array to account for the winter months rather than solar. If you indeed want to go grid tie you could get one of their bundles with the larger 12k single unit as I’m pretty it can backfeed
Usually it’s one flag that actually does something, surrounded by about 8 to 9 flags that do absolutely nothing. “flag soup” as developers like to call it. People add all of them at once and so they assume all of them are doing something when in reality only one of them did anything at all
Yeah it’s WAY WAY WAY easier if you DON’T grid tie. Off grid inverters with battery are the way to go. they are basically just a UPS on steroids they can take the grid as an input but they will never feed back into it. Meaning your power company need not be involved at all thankfully.
Honestly you really don’t need to be all that familiar with the DC Systems either. There’s so many amazing resources out there that will literally hold your hand through the whole process. What kind of cut-offs you need to have, what type of Breakers and where. Pass that just don’t swap positive with negative and you’re basically good to go it’s a shockingly simple system which is why it’s so disgusting how much they charge to install it
No need, you can just look at the source code and see that that flag is not defined anywhere. It’s not going to do anything it’s not even being parsed it’s just getting ignored. The creator of dxvk complains about this all the time. People piling on completely useless or redundant flags and spreading them everywhere.
So long as you understand that you’re paying out the ass for a company to do it. It’s actually very simple to do yourself, and if you’re willing to do it yourself for $20,000 you can get 20 KW of solar panels, 12 KW of inverter output and 32 KWh of battery storage from signature solar.
It’s not difficult to do, it’s not difficult to do properly and to code and safely. The amount that these people charge for the labor is fucking asinine and wildly out of line with the difficulty of the work done.
I have at this point installed three solar systems two for myself and one for a friend all of them have been inspected by Master electricians and passed and the only information I used was solar DIY Forum posts and YouTube videos
Honestly the site is kind of useless, every time I look at it games that work perfectly out of the box with no changes will practically say that they don’t work at all and vice versa games that don’t work at all will say they run without issue.
Not to mention the amount of people putting literally fucking hundreds of completely worthless flags that actually do literally nothing whatsoever in the code swearing left right and Center that it does something. I kind of wish that site would just disappear
As a husky owner i feel this for different reasons. Fur, fur everywhere always forever
Your not too dumb to learn linux. I know it seems scary, and a lot of the autistic people that like it will try to convince you it’s only for really smart people. But at the end of the day a lot of basic tasks are actually easier on linux. There are some that are harder gaming used to be very difficult for example. Although thanks to valve, and the steam deck for the most part if it’s a steam game you can just click play and it’s probably going to work.
But as an example of a more basic thing, let’s say you want to install an application.
Windows: go to Google, type app name, make sure it’s the real actual website officially for that app and not a sponsored result or some other fake website, find the download, pray it’s not buried in a bunch of fake download buttons, double click the exe, be careful to make sure it’s not installing any toolbars or other packaged bullshit, finally get your application.
Linux: there are some variations (apt dnf pacman) but all of them work the same, for arch it’s “pacman -Syu <name of app>” id argue thats WAY easier. If it’s not in the main repos chances are high it’s in the AUR (arch user repository) so you just yay -Syu <name of app>. It’s not harder (imo) just different.
I’ve actually had a number of pretty average computer user friends let me help them transition to Linux because of the crap Windows is doing lately. And after getting used to the differences they agree that Linux is not actually harder, it’s just different, they grew up with windows, they are used to how things are done on windows, so it seemed difficult just because it wasn’t the same. But once they got used to it they would actually agree that a lot of things are actually easier.
Now whether or not you want to put in that time to learn those differences, and change how you use your computer, is an entirely different question that you have to ask yourself. But you are not too stupid to learn Linux because realistically it’s not any more difficult than Windows is