I’m doing that and generally the next step after that is : “OK, can you do it again and this time DO NOT CLOSE THE ERROR POPUP so we can get information on what is happening”
I’m doing that and generally the next step after that is : “OK, can you do it again and this time DO NOT CLOSE THE ERROR POPUP so we can get information on what is happening”
Plus your probably save on gas too.
Same thing, I’m mostly using the GPS on my phone but unless I try to always carry a paper map with me as a safety.
On the other hand I did took care of a pool for a while, it was in a villa that my in laws owned.
We did a few things that helped lowering the maintenance cost and the pool was pristine.
First thing is a salt chlorinator. It keeps a constant (low) chlorine level so the pool stays clean, there is no more chlorine smell and you only need to top up salt after too much rain.
Then we were using hardware store muriatic acid to bring the pH up and baking soda to control alkalinity. We still went to the pool store to get productd for the calcium hardness and cyanuric acid.
The last thing is a bit more involved but this is what made the biggest difference on the bill is to replace the pump with a DC pump directly connected to refurbished solar panels, no batteries, no inverter. This way when there is a lot of sun the pump is running a lot, a little sun and the pump is running a little.
It’s perfect since the amount of algae development is proportional to the amount of sunlight. There is almost no electronic in the system, just a extremely reliable DC pump and solar panels that can last for decades, I found that to be a great low-tech solution.
However we were in a tropical country, I have no idea if this would apply in another climate.
This was my criteria for buying a house : no pool !
I’m using both a the same time, one tab, two space, another tab…
This way everyone is happy.
In a few French cities they use the heat from data centers to heat up public pools
Is it really a drop in the bucket b when we take the value per vehicle ?
If we compare Ford to BYD for example.
In 2023 Ford sold around 2 millions cars and BYD around 3 millions.
For Ford only 72 608 cars out of these 2 millions were EV (3.6%) For BYD it’s was almost 1.6 million EV (53.3%)
In 2023 Ford got $9.2 billions from the US government to produce EV, so around $126 000 per EV sold in 2023.
$126 000*1 600 000 = $2 trillions ! So unless BYD received more than $2 trillions dollars from the Chinese government in 2023 it means that each EV sold by Ford is more subsidized than an EV sold by BYD.
This is not an analysis, I took huge shortcuts in this comment and might have done mistakes in the calculations.
The argument of China subsidizing EV is always coming back but I would be curious to know the comparison with the US.
The US are subsidizing EV too I would not be surprised if the amount of subsidy per EV produced is much higher for US manufacturers than China.
On the other hand the engineers building the CERN had to include a system that compensate for the land tides due to the moon and sun gravity.
I was thinking exactly that yesterday, I looked for a way to have few web apps without using ferdium.
And we get these 100W from transforming food that we find on/in the ground.
Global clipboard synced with the smartphone thanks to KDE connect !
The goal for alternative transit is not to remove traffic jam, it’s to transport people.
9mph is slower than a bike, it fits with my experience. When living in a city (in Europe, it might be different in the US) my feeling was always that bike was the fastest, public transport a bit slower but more comfortable (mainly protected from the elements and car drivers) and lastly car was the slowest and more stressful.
In France the police will come and arrest you for suspected terrorism because they you had a vegan book in your kitchen
I understand you’re argument but I disagree. If the goal is to use FreeCAD then yeah, it’s probably better to start as a beginner.
If the goal is design parts using CAD then Onshape is a much better option in my opinion.
I would definitely recommend Onshape, this is what I use.
It’s great that FreeCAD exist but I would not recommend it for a beginner in CAD, there is a very steep learning curve before being able to create anything in it.
No,
There is all the backup of all my family pictures in the drives.
If something happens to me I want to make due that they will have access to it.
One word: privatization