Trying to squeeze some more storage in my MiniPC. I have questions about these. These use hardward RAID with selectable modes (Individual/JBOD/RAID1/RAID2).

  1. If I use RAID 1 and one of the drives fails, will I know?

  2. If a drive fails, and a slap in a new one, will it internally begin repairing RAID 1 again?

  3. Can I use these as “individual” or JBOD and have 2 separate drives through the same connector, and use something like TrueNAS to software-RAID them?

  • Scrubbles@poptalk.scrubbles.tech
    link
    fedilink
    English
    arrow-up
    1
    arrow-down
    4
    ·
    8 months ago

    Right, mostly because the only things you plug into an m.2 slot right now are nvme drives. Which is why I’m honestly trying to figure out what OP wants. They say speed isn’t a concern just storage, so why not go for a larger SATA SSD then? Unless I’m missing something, buying this adapter to add m.2 slots would only give op a couple m.2 slots, vs just adding a sata drive itself. Honestly I don’t know what they’re trying to to do and their comments have made me more confused

    • mbfalzar@lemmy.dbzer0.com
      link
      fedilink
      English
      arrow-up
      2
      ·
      7 months ago

      My desktop has a wireless card in an m.2 slot (as do those of my wife and both children), one of my laptops has a SATA m.2 as its only drive because it only has a SATA m.2 slot, another laptop has a SATA m.2 as the scratch drive because it has one NVMe and one SATA, and “the only things you plug into an m.2 slot right now are nvme drives” is such a wild take that I’m baffled as to where it came from

      • accideath@lemmy.world
        link
        fedilink
        English
        arrow-up
        3
        ·
        8 months ago

        Which is fair, I suppose, if you really only have one SATA port left. Then a RAID 1 through that device might work well enough. Wouldn’t be my first choice though… and definitely not for RAID 0. Not that RAID 0 should be anyone’s first choice, nowadays.

      • Scrubbles@poptalk.scrubbles.tech
        link
        fedilink
        English
        arrow-up
        1
        arrow-down
        3
        ·
        edit-2
        8 months ago

        Neither is there if this controller dies… Like the other person said, my response would be “you don’t have 2 sata ports then?”. Better raid support and better capacity. Take it from my life lessons. Raid 0 is not a backup, it is barely redundant. It’s primary use is production environments where you do not want your system to go down when a drive fails.

          • Scrubbles@poptalk.scrubbles.tech
            link
            fedilink
            English
            arrow-up
            1
            arrow-down
            2
            ·
            edit-2
            8 months ago

            Okay, I don’t know why you’re downvoting me, and I’m over it. I was trying to help you and understand the question, I was trying not to be argumentative. My honest responses haven’t changed on your questions, I think it’s going to fail quickly, I think you’re going to regret it, and I don’t think it’s good for your use case. But hey, what do I know, I’ve only done basically the same thing and self hosted stuff for 15 years, and was only trying to help you avoid the mistakes I made. Sorry I didn’t just agree with everything you said and was trying to figure out alternatives.